⚡ Pressure Washing · Concrete Sealing

Clean Concrete.
Protected for Years.

Every Utah winter, freeze-thaw cycles silently crack and erode unsealed concrete. By the time damage is visible, replacement runs $10 per sq ft — sealing costs a fraction of that and protects your concrete for 15 years. We pressure wash and seal driveways, patios, and sidewalks — protecting your concrete now before the damage is done.

Get a Free Quote Our Services
$1.50
Per Sq Ft, Flat Rate
15 yr
Sealant Potency
Same Day
Quotes Available
Cracked unsealed driveway
Unsealed
Clean sealed driveway
Protected
🛡️ Fully Insured
📅 Flexible Scheduling
💬 Free Estimates
🌿 Eco-Friendly Solutions
⭐ 5-Star Rated
What We Do

Why Seal Concrete?

🏠

Concrete Washing & Sealing — Driveways, Patios & Sidewalks

Every concrete surface around your home is vulnerable to the same threat — water, freeze-thaw cycles, road salts, and UV exposure slowly break concrete down from the inside out, leading to spalling, cracking, and costly replacement. We pressure wash your driveways, patios, and sidewalks to remove built-up grime and contaminants, then seal them the following day with a professional-grade penetrating sealer. This isn't a cosmetic fix — it's preventative care that extends the lifespan of your concrete by decades and keeps replacement costs where they belong: off your plate.

🛡️ Our Sealant

Professional-Grade Penetrating Sealer

Concrete replacement costs $10 per sq ft — sealing is 10x cheaper and protects your investment for up to 15 years. Seal now or replace later. We apply a commercial-grade penetrating sealer that soaks up to 4 inches deep into your concrete, forming a waterproof barrier from within — not just on top.

⏳
15-Year Protection
At $10 per sq ft to replace, a 1,000 sq ft driveway costs $10,000+ when it fails. Sealing it now costs a fraction of that and protects it for up to 15 years — 10x cheaper than replacement.
👁️
Invisible Finish
No film, no sheen, no color change. Your driveway looks completely natural — just clean, protected, and strengthened from the inside out.
❄️
Utah Weather Ready
Reduces cracking from freeze-thaw cycles and resists damage from road salts and deicing chemicals — exactly what Utah winters demand.
🌿
Safe & Eco-Friendly
Water-based, low-VOC, non-toxic formula. Safe for kids, pets, and plants. No harsh odors during or after application.
💧
Breathable Formula
Allows trapped moisture to escape from within the concrete — won't yellow, bubble, or peel like surface coatings do over time.
🚶
Slip-Resistant
Won't make surfaces slippery when wet. Safe for driveways, patios, and sidewalks with the same traction you're used to.
Get a Free Quote
How It Works

Simple. Fast. Done Right.

1

Request a Quote

Tell us about your property and the surfaces you need cleaned. We'll respond fast.

2

In-Person Assessment

We come out to your property to measure the area and give you an accurate, no-obligation quote face to face.

3

Book a Time

Pick a day that works for you. We show up on time, every time — no waiting around.

4

Enjoy the Results

We clean up everything and leave your property looking better than you imagined.

Our Process

How We Do the Work

Day 1
Preparation & Washing
1
Clean out cracks & pre-rinse
Remove debris from cracks and joints, then rinse the entire surface to prep for soap application.
2
Apply soap & dwell
Professional cleaning solution is applied and allowed to penetrate and loosen embedded grime and contaminants.
3
Surface clean
High-pressure surface cleaning removes dirt, oil, algae, and staining across the entire concrete area.
4
Final rinse
A thorough final rinse removes all soap residue. Surface is left clean and ready to cure overnight.
overnight
Day 2
Sealing & Protection
1
Blow off residual debris
Any dust or loose particles that settled overnight are cleared before sealing begins.
2
Apply penetrating sealer
Professional-grade sealer is applied evenly across the surface, soaking up to 4 inches deep into the concrete.
3
Barrier off & cure
The driveway is coned off and left to cure for the remainder of the day. No vehicle or foot traffic until fully set.
Vehicles and foot traffic can resume the following morning once the sealer has fully cured.
A note on stain removal: Results vary depending on the type and severity of staining. Oil stains often lighten significantly, but deeply set or long-standing oil stains may not fully disappear. Rust stains are generally permanent and cannot be removed by pressure washing alone. We'll give you an honest assessment during our in-person visit — no surprises.
Free Instant Quote

See Your Price
in Seconds

Enter the square footage of each surface you'd like cleaned and sealed. We charge a flat $1.50 per sq ft — no hidden fees, no surprises.

✅ Wash + seal included in price
✅ Professional-grade sealant, 15-yr potency
✅ Two-day process, no rush
✅ Free, no-obligation estimate
Calculate Your Quote
Estimated Total
—